bag12day
Well-Known Member
- Joined
- Nov 2, 2008
- Messages
- 1,287
- Likes
- 2,442
That is patently false and misleading. Ever owned or maintained boats in a salt water (marine) environment or stored a boat in a constant moisture state like a marina slip? I have multiple times.EX6100 | WiFi Range Extenders | Networking | Home | NETGEAR
On your original post, I can say from having boats there's no difference in the model radio/speaker/amp you would put in a car vs what you would put in a boat. The three differences in something for a boat is, it's labeled "marine", usually white, and is more expensive because of that "marine" label.
There's zero difference in specs otherwise.
Don't know if you have just had good luck with regular audio equipment in boats before or what but just because you have put regular car stereos on your weekend ski boat doesn't make it true. I have had car stereo components on boats I own that don't see a lot of moisture do great and I have owned several boats in salt water environments or stored in wet slips at a lake that required marine grade electronics due the amount of moisture they are constantly in.
The "more expensive" is due to the fact that there are massive differences in marine electronics standards from water proof gaskets, IP6, IP7, or IP8 water resistance, internal component construction, face shields and remote controls, to internal components that are comprised non corrosive materials, to tinned wiring and coated circuit boards, full plating on connectors, NEMA type 4X junction boxes, etc....
Speakers (rubberized cones) and amps are the same thing requiring tinned (completely coated wiring and connectors) exposed metal or even the copper wiring in a boat.
FYI most are white due to use of UV stable polymers in the case construction but you can custom order colors.
Research JL audio equipment (which I have in 2 daily drivers, a classic chevelle with subs and amps, and two boats I run) and talk to their tech specialists to explain the differences to you or tear down a car amp and a marine amp like I have and the results will answer your incorrect assumptions.
To @allvol123 on your back porch not in your boathouse on the lake you will be fine with regular off the shelf stuff and the occasional mist, heavy dew, or fog. Keep out of direct sunlight both for viewing pleasure and longevity of the screen and you will get many years of service. You can even custom weld or glue a plastic shield "box" around the flat screen to reduce any glare if applicable.
EDIT @Orange_Vol1321 in re reading that statement it came off little more harsh than I intended Sorry bout that.